Comment by 🚀 Remy
Re: "A 6502 on a $20 Tang Nano 9K"
My friend used python to make his commodore 64 for the analog pocket
2024-07-31 · 2 years ago
5 Later Comments ↓
🚀 stack [OP/mod] · 2024-07-31 at 20:22:
@remy do you mean this project?
— https://github.com/markus-zzz/myc64-pocket
Analogue Pocket is a cool FPGA handheld (2 FPGAs I think). I don't think there is much Python involved, however. At least I hope not, for I am not a fan of Python.
yes, this project. There is a tool that converts python to verilog and then compiles.
🚀 stack [OP/mod] · 2024-08-01 at 16:18:
@remy I can't imagine why anyone would ever want to do that, but the world is full of strange and sometimes interesting things
It is simpler to write python than verilog for people who like python. It is possible to have a design with both verilog and python. The entire design doesn't have to be written in python
🚀 stack [OP/mod] · 2024-08-01 at 20:50:
I know people do this, but aside from my objections to Python as an abomination of a language in general, and its lack of stability when some library 10 layers down gets updated...
Verilog is already pretty far from the hardware -- and you have to cross your fingers and hope it infers the circuitry you want... To add another layer adds yet more uncertainty about what will come out, and you would still need to know verilog to make sure your translator is not generating something similar but different from what you want.
But there is no accounting for taste or poor judgement. I am sure your friend knows what they are doing.
Original Post
A 6502 on a $20 Tang Nano 9K — Ah, after some fiddling, got a minimal 6502 system flashing an LED. Running at stock 27MHz, with 2K RAM and 2K ROM. The FPGA has 48K of block RAM and an HDMI interface, so I could build, say, a credible Apple 2, or an Atari -- the CPU consumes just over 10℅ of resources. There is also an SD card interface and an 64mbit SDRAM, and a bunch of Flash, and an LCD interface... Not bad for $20.